Description
Description
PT**4 Series Melt Pressure Transducer can achieve the pressure and
temperature measuring. This series adopt special material and alloy
elastic membrane to low down temperature draft and improve
accuracy. The zero & full span can be calibrated, with amplify
signal be connected with PLC, and internal *0% calibration. It has
the wide application in high-temp liquid pressure measurement and
control such as Chemical & Fiber equipment, polyester
equipment, etc.
Specification
Range: 0….*0Mpa to 0….**0MPa (0…***0psi to 0…****0psi)
Output: 3.*3mV/V; 2mV/V
Accuracy: ±0.5%FS
Excitation: *0VDC
Repeatability: ±0.2%
Diaphragm material: ***5PH
Bridge resistance: **0 ohms±*0%
Overload pressure: 1.5×FSO
Internal calibration: *0%FSO±1%
Insulation Resistance: *@********************ragm Temp: **0℃
Electric connector: 5PIN, 6PIN, 8PIN
Process connector: 1/2″**0UNF, M*4×1.5, M*8×1.5(Customer
design)
Rigid stem length:6"(**2mm) , 9"(**0mm)
Flexible stem length:*8"(**0mm)